HUATAO GROUP LTD.
HUATAO GROUP LTD.
홈페이지> 블로그> The Research of Spunbond Nonwoven fabric

The Research of Spunbond Nonwoven fabric

July 02, 2018

spunbond nonwoven fabric


In the non-woven fabric manufacturing method, since the spunbond method has obvious advantages in terms of manufacturing technology, product performance and production efficiency, it has achieved rapid development attracting worldwide attention in the past 20 years. Now about 40% to 50% of non-woven fabrics are produced by melt spinning (including spunbonded, melt-blown, and a combination of the two). This melt spinning method is used in the total output of each region. The proportions in the United States accounted for 50% in the United States, 37% in Europe, and 41% in Japan. It can be seen from the data that the advanced countries all adopt the melt spinning method as the main production method of non-woven fabrics. In the most developed North America region in the 1998 years, the market for spunbond nonwovens accounted for over 54% of the total nonwoven market.


The research of spunbonded non-woven fabrics was developed by DuPont and Freudenberg at the same time in the US and Europe at the end of the 50's. Then in the late 1960s, countries around the world began producing spunbond nonwovens. Japan started in the 1970s. In the mid-1980s, the Asia Pacific region started production with technology acquisition as a starting point.

The important reason for the rapid development of spunbonding is its use of synthetic polymers as raw materials. This method utilizes the principle of chemical fiber spinning, continuous filaments in the process of polymer spinning, and direct bonding after web formation after spinning. Non-woven fabrics, manufacturing method is very simple and fast, compared with dry non-woven fabric processing technology, eliminating the need for a series of cumbersome intermediate processes such as fiber curling, cutting, packing, conveying, mixing, carding, etc. This continuous, large The most significant effect of batch production is to reduce the cost of spunbonded products, stabilize the quality, and provide strong market competitiveness. This can be applied to the textile, paper, and film markets in a variety of uses, including disposable and durable applications. Secondly, due to the large amount of polypropylene used as the main raw material for spunbonded nonwovens, many of its advantages in terms of price, processing, and production costs have greatly promoted the continuous development of the spunbonded nonwovens industry. In addition, the spunbonded non-woven fabrics have excellent mechanical properties, and their tensile strength, elongation at break, and tear strength are superior to those of dry, wet, and melt-blown nonwoven fabrics, especially in recent years. The rapid development in the scale of the production line, technology and equipment and product market expansion has greatly expanded the application of spunbonded nonwovens.

The biggest difference between the spunbond production process and chemical fiber spinning is the use of air drafting and direct web formation. Therefore, the draft of the spunbond method becomes the core problem of the technology. In the past, the drafting method was mechanical drafting, and the fiber monofilament was used. Thicker, uneven laying. At present, the air-jet drafting technology has been adopted in all spunbond production facilities around the world. Due to different drafting methods, the spunbond production line has three different forms, namely tubular drafting, wide-slit drafting, and narrow slotted drafting. Extend and wait.

The spunbond non-woven technology has always been to improve the production line capacity and solve the problems of non-woven fabric uniformity, covering, rough feel, etc., to improve the strength, flexibility, uniformity and comfort of spunbonded non-woven fabrics. , hygroscopicity and other properties.

Dandan Spunbond nonwovens can directly improve the flexibility and comfort of spunbond nonwovens. However, the spunbonding process has a technical bottleneck. For example, fine denier can increase the number of fiber units per unit area of the spunbonded nonwoven fabric, and the “bonding point” between the fiber and the fiber increases. Products will also become more uniform and coverage will increase.


Huatao Group also supplies belt filter cloth, nonwoven mesh belt, industrial felts and etc.


문의하기

Author:

Mr. Maple.Zhao - Africa Market Director

Phone/WhatsApp:

+8618033763037

인기 상품
You may also like
Related Categories

이 업체에게 이메일로 보내기

제목:
이메일:
메시지:

Your message must be betwwen 20-8000 characters

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신